10G XFP BIDI 10km Optical Transceiver

Descriptions of 10G XFP BIDI 10km Optical Transceiver

This 10Gigabit XFP BiDi transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km.

The 10G XFP BiDi 10km optical module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The 10G XFP BiDi 10km optical module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-LR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. Logic “1” or no connection on this pin will disable the laser from transmitting. Logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (Tx_Fault) is provided.  TX_Fault is module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the XFP module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor

Features of 10G XFP BIDI 10km Optical Transceiver          

10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR, single LC connector for bi-directional  application, over 10km SMF    
Electrical interface compliant to INF-8077i specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module “XFP”
1270/1330nm DFB transmitter, PIN photo-detector
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
line side, client side loopback function
Advanced firmware allow customer system encryption information to be stored in transceiver
ROHS compliant
Part number
 DC-Z9223C-10, 1270TX/1330RX
 DC-Z9232C-10, 1330TX/1270RX


Parameters of 10G XFP BIDI 10km Optical Transceiver



Applications of 10G XFP BIDI 10km Optical Transceiver

High-speed storage area networks      
Computer cluster cross-connect
Custom high-speed data pipes
Line side loop back
Client side loop back


5/27/2016 6:20:58 AM

Contact us

As a leading optical transceiver module provider, DataComm offers both excellent high-quality products and servies to global customers over the world. And you can contact us for inquiry and quote as below ways.
Address:
8A,Haiyuege ,Huijing Haoyuan,NO.10 Kexing Road, Science Park,Nanshan District,Shenzhen,Guangdong,China. 518057
WEB:
www.datacommun.com
E-mail:
sales@datacommun.com
Telephone number:
Tel:+86-755-86366516
Fax:+86-755-86366516