100G QSFP28 PSM4 1310nm 2km Optical Transceiver

Description of Datacomm 100G QSFP28 PSM4

This product is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. The Datacomm 100G QSFP28 PSM4 2 KM optical transceiver provides increased port density and total system cost savings. This QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 2km of single mode fiber. An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the 100G QSFP28 PSM4 optical module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector. This 100G QSFP28 PSM4 optical module operates with single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down  be managed through the I2C two-wire serial interface.

Features of 100G QSFP28 PSM4 Optical Transceiver    

4 independent full-duplex channels

Up to 28Gb/s data rate per channel

QSFP28 MSA compliant

Compliant to IEEE 802.3bm 100GBASE PSM4

Up to 2km reach for G.652 SMF

Maximum power consumption 3.5W

Single +3.3V power supply

Operating case temperature: 0 to 70oC

RoHS-6 compliant

Applications of 100G QSFP28 PSM4 Optical Transceiver

100G Ethernet links

Infiniband QDR and DDR interconnects

Data center and Enterprise networking


Parameter of 100G QSFP28 PSM4 Optical Transceiver  


Dimensions of 100G QSFP28 PSM4 Optical Transceiver



5/25/2016 5:22:48 AM

Contact us

As a leading optical transceiver module provider, DataComm offers both excellent high-quality products and servies to global customers over the world. And you can contact us for inquiry and quote as below ways.
Address:
8A,Haiyuege ,Huijing Haoyuan,NO.10 Kexing Road, Science Park,Nanshan District,Shenzhen,Guangdong,China. 518057
WEB:
www.datacommun.com
E-mail:
sales@datacommun.com
Telephone number:
Tel:+86-755-86366516
Fax:+86-755-86366516